Vivo Y30 Standard USB Driver (Official)

Vivo Y30 Standard USB Driver Official
Vivo Y30 Standard USB Driver Official

Haven’t found Vivo Y30 Standard USB driver yet? If so, then follow this article to download the latest official versions of USB drivers for your Vivo Y30 Standard.

Vivo Y30 Standard was officially released in 2020, December. It works on Android 10 including Funtouch 10.5. Along with this, has a Dual 13MP + 2 MP main camera.

vivo-y30 standard

Drivers are very important when it comes to connectivity or flashing the firmware file. If you have the right drivers installed, you’re good to go. Otherwise, you might face unsteadiness and interruptions while performing particular operations.

In addition, you will also find the official Vivo PC Suite software. Simply download all drivers and the PC suite from the download section of this page below.

Download Vivo Y30 Standard USB Driver and PC Suite Software: Latest Official Versions

USB drivers

USB driver for another variant

Instructions for installing the drivers

  • Simply download all the drivers to your computer.
  • Once you have completed the download, now extract the zip files and then run the installation process.
  • Moreover, in the case of exe files, just run the file and start the installation process.

How to install Vivo Y30 standard drivers on a computer

Step 1: First of all, download the ADB drivers for your Vivo Y30 Standard.

2nd step: After that extract the zip file and go to device manager.

Step 3: Now select your PC or computer in the device manager.

picture

Step 4: After that, click on the “Action” tab and then click on “Add Legacy Hardware”.

Step 5: Now continue with “Next” until you see the interface below.

picture

Step 6: Click “Next” and you will see the interface as below. This time, click on the “Browse” button and navigate to the extracted ADB folder that you downloaded before, then select the android_winusb file.

picture

Step 7: Once you have selected the file, follow the onscreen instructions and proceed to install the ADB drivers on your computer.

Here you have successfully installed Vivo Y30 Standard ADB drivers on your computer.

Need pilots

  • Provides a software interface to hardware components.
  • To connect your smartphone to a computer.
  • to flash the firmware file.
  • To gain root access.
  • In addition, to install the custom ROM.

About Vivo Y30 Standard

vivo-y30 standard

The phone officially made its presence in the market in 2020, in December. It supports dual SIM card. As for the display, it has a 6.51 inch screen that supports the resolution of 720 x 1600 pixels.

The phone runs on Android 10, including Funtouch 10.5. For smooth performance, it includes an Octa-Core processor.

The internal memory of the phone includes 128 GB with 6/8 GB of RAM. The phone is equipped with a 13MP + 2MP dual main camera with LED flash. An 8MP secondary camera is available for selfies on the front.

The phone’s connectivity support includes Bluetooth, GPS, WLAN, Radio and USB. For the sensors, the phone brings proximity, compass, accelerometer and fingerprint.

When it comes to battery power, it offers 5000mAh Li-Po battery. It is available in two colors which are Glacier Blue and Aurora.

The price of the Vivo Y30 Standard is around 180 EUR.

LEAVE A REPLY

Please enter your comment!
Please enter your name here