Xiaomi Redmi K30 5G was officially released in 2020, in January, supporting dual hybrid simulation. If you want to connect your smartphone to your computer or flash the firmware on your device, then you are fortunately in the right place here to find the latest Xiaomi USB drivers officially tested for 2020 for your Xiaomi Redmi K30.
In this article, we have provided all the required Xiaomi USB / ADB drivers for your Xiaomi Redmi K30 5G smartphone. Continue reading the article and you will be able to download the required drivers for your smartphone. We also provide drivers to flash the firmware with the Xiaomi mtp drivers and the Mi pc suite software tool which is used to perform different types of operations on your Xiaomi device. All these drivers are compatible with all versions of Windows OS like Vista, XP, 7, 8, 8.1 and 10.
Before installing these drivers on your computer, you should watch the video tutorials based on installing these drivers provided below.
Xiaomi Redmi K30 5G brief review
Redmi K30 5G is equipped with a 6.67 inch IPS LCD capacitive touch screen supporting the resolution of 1080 × 2400 pixels protected by corning gorilla glass 5 technology. The default version of the software installed there is Android 10 with MIUI 11 powered by an Octa-Core processor.
As for the internal memory, the phone includes 64 GB with 6 GB of RAM or 128 GB with 6 GB of RAM or 128 GB with 8 GB of RAM or 256 GB with 8 GB of RAM. As far as the camera is concerned, the Redmi K30 5G includes a Quad 64MP + 8MP + 5MP + 2MP main camera with dual LED flash, including features and a Dual 20MP + 2MP secondary camera for selfies.
The phone’s connectivity support includes WLAN, Bluetooth, GPS, NFC, infrared port and USB. The sensors present on the phone are the fingerprint, the accelerometer, the gyroscope, the proximity and the compass. The Xiaomi Redmi K30 5G is powered by a Li-Po 4500 mAh battery and is available in four impressive colors: blue, red, purple and white.
The price of the Xiaomi Redmi K30 5G is $ 290.
Download Xiaomi USB / ADB Driver for Xiaomi Redmi K30 5G
- Download (ADB) Drivers for connection purposes.
- Download (CDC) Drivers to flash the firmware.
- Download (VCOM) Drivers to flash the firmware.
- Download (ADB and Fastboot) Configuration for Xiaomi Redmi Note 8T.
- Download Xiaomi Mi PC Suite for Xiaomi Redmi Note 8T.
- Download MediaTek driver for Xiaomi Redmi Note 8T.
- Download MTP driver for Xiaomi Redmi Note 8T.
Video tutorials on how to install the ADB driver on a computer
Guide to install ADB and Fastboot Setup on the computer
Step 1: Download the ADB and Fastboot configuration above, then extract it.
Step 2: Go to the extracted folder, then click on the .exe file and “run as administrator”.
Step 3: A new command window will appear where you will need to press “Y” then press the Enter key to execute. perform this step until the pop-up windows of the installation wizard appear. Now click on the “Next” button in the installation wizard and follow the on-screen instructions.
Why is a driver required?
- For connectivity purposes, the ADB driver must be installed on the computer.
- For flashing firmware, VCOM and ADB drivers are required.
- You can perform a particular task without any hassle.
- Provide a software interface to the hardware.
If you have a question related to this post, let us know in the comments section.